Izdelki za cev za testiranje (12)

The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or round-the-clock method according to EN744. According to EN 744 , EN 1411 , ISO 3127 , ASTM D 2444 , digital height control , touch display , automatic control of number of impacts , motorized sample table Height of fall :up to 2000mm Display :3" touch No. of impacts :Automatic Auto rebound system :included Release mechanism :Magnetic

Madenciler Metal offers a wide range of products in the categories of Pipe, Profile, Rolled, Sheet and Hardware Group Products, and is the solution partner of qualified projects such as machine manufacturing, furniture production and steel construction works.

The PLUGLINE Pipe Stoppers are designed for quick and reliable sealing and blocking of sewers, pipes, gullies, and drainages. They are recommended mainly in case of repairs, maintenance, failures, and they are ideal for leak inspections by performing hydrostatic testing. When performing hydrostatic testing, these plugs are placed at the other ends of the pipes to block the pipes under test. Another common use of pipe stoppers are to prevent the ingress of water, gases, construction waste, dust, rat and rodent into a newly constructed pipe lines. The PLUGLINE Pipe Stoppers are made of high-quality special NR/SBR rubber reinforced with kevlar tire (lighter, tougher, and more puncture-resistant) cording. This material can be changed with NBR, CR, EPDM materials according to customer and application requirement. Available for pipe diameters from 35 mm (1,37") to 4200 mm (165,35").

The RCP tester conveniently and accurately determines the critical pressure and critical temperature for rapid crack propagation in PE pressure pipes. According to ISO 13477 , motorized height adjust , trolley for sample , freezer , 40 bar air compressor , ring and baffles for samples , computer controlled

The temperature cycling tester is designed to determine the resistance of thermoplastic pipe network and connections consisting of stiff or flexible parts to alternating thermal shock. This applies to pipe systems intended to be used for conveying hot and cold pressurized water. According to EN12293, ISO10508, sample carbon, 3 pressure lines, hot and cold water tank, chiller, computer controlled, report in WORD No. of test samples :3 Pressure range :up to 18 bars Test cabon :Included Chiller :Option Control type:by computer Data port :USB Hot and cold water tank :included Software:included

Test samples of PEX need to be immersed in boiling solvent and the insoluble part measured. The percentage of this part is degree of crosslinking. For this, we recommend a laboratory assembly consisting of a round glass fl ask with a heating jacket, a Dimroth cooler, a ring stand with suitable clamps and test holders with lids for the sample. To complete the measurement you will also require a heating oven and analytical balance. According to ISO 10147 , DIN 16892 , ASTM D 2765

It is used for making V-shaped nothes in polyolefin pipes in accordance with ISO 13479 for slow crack growth testing. Digital notch depth monitor, digital notch length control, motorized sample holder, speed adjust

The Combined test stand is used to carry out leak tests on pipe connections while they are going to have some mechanical force application for bending and crimping of the joint. It is used for testing of plastic pipes like corrugated one for joint's sealing. According EN 1277 , EN 1035 , Computer controlled , windows based software , control unit separate from cabin , bending and squeezing device , special end plugs

ElectroFusion fittings are specifically designed for reliable, high performance pipe joining and long system life. AHP offers a diverse range of electro fusion mechanical testing machines including ISO 13954 Peel Decohesion Testing ISO 13955 Crush Testing ISO 13956 Decohesion testing of Saddle fusion joints. Also we offer dual use machine for both PE pipes squeeze-off tests and mechanical tests of EF joints. Hydraulic system , suitable for crush test of electrofusion fittings and squeeze of test of HDPE pipes

Loss in weight gravimetric feeder for extrusion lines automatic control, it controlls the haull-off speed and weight per meter of pipes during extrusion process.

for guiding welder during weld process and recording welding data also printout of data to excel file and thermal printer included

According to ISO 1167 , ASTM D1598 and ASTM D 1599 , European pump , sensors and valves, 19inch display, report out in WORD, manual charge and discharge, automatic pressure control, pressure rate control, water circulation system, digital temperature controller,Airless system • maximum accuracy, a long service life and a user-friendly system, combined with flexibility • High-precision pressure regulation, selectively regulated input pressure in each Line • All metal components that come in contact with the medium is brass ans SS304 • Quick system calibration easily by the operator and calibration data saved in the controller modules • Convenient operation, evaluation of results and clear visualization via Labview and windows based software • Operator access to all important settings from the front panel • Each station can be individually isolated from the supply pressure for service purposes • PLC based control of the pressure channels • Pressure gauge for checking each line actual pre Pressure range :up to 100 bar Pump capacity:11lit/min Control type:Automatic computerized Computer :is an option Reporting:Microsoft WORD Number of pressure lines :Based on cutomer request Sensors and solenoid valves:EUROPEAN Data interface:USB Display size:7" or 19" based on request Standard:ISO 1167 , ASTM D 1598 , ASTM D 1599